该门型为典型的定制类门型，根据客户的特殊使用要求、现场使用环境等综合因数而设计。大门双向、变频多段速平移运行、上承重、下导向。大门主要由导轨、行车轮、开门机、门扇、罩壳、传动组件、控制系统、安全保护系统组成。门扇及驱动、传动罩壳采用304#不锈钢，中间填充防火、保温岩棉及特殊材料，门扇边挺采用热镀锌钢型材，导轨是特制的冷轧型材。大门宽8米、高2.8米、门扇厚度160mm、整樘门重约1.2吨。

The door type is a typical custom type door type, according to the special requirements of customers, the use of the environment and the use of the integrated factor design. Door two-way, frequency conversion and multi section of the speed of the movement, the load bearing, the next oriented. The door is mainly composed of a guide rail, a driving wheel, open the door machine, a door leaf, a cover shell, a transmission component, control system and safety protection system composition. Doors and drive, the transmission cover adopt stainless steel 304#, the middle filled with fire prevention, insulation rock wool and special material, door stile by hot dip galvanized steel sections. The guide rail is made of cold-rolled 

适应高原昼夜温差大、强日照、极自然环境寒的恶劣

To adapt to the high temperature and temperature difference between day and night,

strong sunlight, and extremely natural environment of the cold

√ 门扇采用304#2.0mm厚（实厚）不锈钢板，门体厚160mm

√ 4mm厚（实厚）热镀锌型材

√ 内填充防火、保温岩棉及特种材料

√ 驱动、传动组件均采用精密数控机床加工

确保高海拔地区 高频率、长期可靠运行

To ensure high frequency, long-term reliable operation in high altitude areas

√ 驱动、控制系统的性能系数为2.0

√ 全系进口元器件

√ 国产军工品牌 驱动电机

保证客户人员及财产安全

To ensure the safety of customers and property

√ 客户财产保护系统：四方认证门禁控制

指纹+密码+芯片卡+内部局域网控制

√ 人员安全保护系统：12线 红外线对射光幕保护

安全气囊保护

预助停止反向运行装置